EverCryo provides cold compression therapy. It is effective in the treatment of pain, inflammation and swelling. The EverCryo Cooler holds water and ice needed for 5-6 hours of cryotherapy and comes with a tube.

Designed to be used with one of the Evercryo Cold Compression Wraps, the Evercryo Medical Cold Therapy System is a CE marked medical treatment for a range of physical ailments. It works by filling your Evercryo Cold Compression Wrap with ice-cold water that provides cooling, pain-relieving therapy for injuries. As the wrap fills, it becomes a compression garment that helps to improve circulation and speed up the healing of muscles and ligaments or wounds to the skin. When used with the Evercryo Head Wrap, it calms headaches and migraine pain.

This revolutionary technology is recognised as a medical device around the world. Awarded ISO 13485 status, this product brings together two of the most therapeutic and effective forms of physical therapy: cold therapy and compression therapy; the combination of which will help you recover faster and reduce your pain in a natural, drug-free way.

Included wraps for the cold compression therapy:

• Ankle Wrap
• Shoulder Wrap
• Thigh Wrap
• Abdomen/Back Wrap
• Elbow Wrap
• Wrist Wrap
• Knee Wrap
• Head Wrap
• Neck Wrap

How to Setup Your EverCryo System:

Follow the steps below for your first set up and if you have any problems at all, please do not hesitate to contact our expert customer service team.

Step 1. Attach the blue hose to the water container via the large white nozzle toward the bottom of the container

Step 2. Fill the container with ice and water. Fill water to the ‘WATER MIN’ line in the cooler and top with ice to the ‘ICE MAX’ line. When full, ensure you put the lid back on the container. If you only wish to use it for a short period of time, you can add less ice-filling to the max line gives you up to 8 hours of use.

Step 3. Pressurise the container

• Remove the small blue nozzle from the lid of the container (screw top)
• In place of the blue nozzle, screw one end of the small clear tube onto the container lid (it does not matter which end)
• Attach the clear tube at the other end to the electronic pressurisation device and plug the device into a wall socket
• Using the + button, set the timer to 90 seconds and press the power button. The device will begin to fill the container with air
• As soon as the timer reaches zero, remove the tube from the container lid and screw the blue nozzle back into place to ensure air doesn’t escape. Your container is now pressurised

Step 4. Secure your body wrap in a comfortable position. It doesn’t need to be too tight as the water pressure will increase the tightness as it fills with water

Step 5. Attach the free end of the blue hose to the inlet on your body wrap, it should secure in place with a click 

Step 6. Open the air valve on top of the container (this part looks like a whistle) and then raise the container higher than the wrap. Soothing, ice-cool water will then begin to fill the wrap

Step 7. The filling should only take around 30 seconds, after which time you must close the air vent. The pressurised container will continue to fill the wrap until the air vent is closed

Once you have filled your wrap with ice cool water, you can remove the hose by simply pressing the blue release button on the inlet. The hose will release, and you can move around freely enjoying the benefits of your cold compression garment.

Your natural body heat will eventually warm the water inside the wrap. If you want to continue enjoying the cooling therapy, simply empty the body temperature water back into the container by following the steps below.

Emptying Your Body Wrap

1. Re-attach the hose
2. Hold the wrap higher than the container
3. Open the air vent and the water will flow back into the container

You may then re-pressurise the container and re-fill your wrap as you did earlier, but please remember:

• • You must disconnect the hose from the wrap prior to re-pressurising the container
  • When you pressurise the container, the air vent must be closed
  • When you are ready to re-fill your wrap, the air vent must be open
  • When you wish to fill the wrap, the wrap should be lower than the container
  • When you wish to empty the wrap, the wrap should be higher than the container

*MERELY ILLUSTRATIVE IMAGES